Products designed and developed
in the United Kingdom
Wooden X Legs (with Wood Top) Installation Guide
Tools you'll need
Safety First
- Use caution when handling heavy or bulky components to prevent injury or damage to yourself and the product.
- Always wear protective equipment, such as gloves or safety glasses, when using power tools to avoid accidents.
- Do not over-tighten screws or bolts, as this can damage the components or compromise the stability of the product.
- Please follow the provided instructions carefully to ensure proper assembly and use of the product.
- Keep small parts away from children or pets, as they can be a choking hazard.
- Inspect the product for any defects or damages before assembly, and contact us if you notice any issues.
- Please do not modify the product or use it for any purpose other than its intended use.
- Use caution when working with sharp tools or edges, and keep them away from children and pets.
- If you are uncertain about any aspect of the assembly process, seek assistance from a professional or contact us for further assistance.
- Do not sit or stand on the product.
- This product is not intended to support heavy objects. Avoid placing excessive weight to prevent damage and instability. MAX 40 Kg.
Instructions
Step 1. Please read the safety guidelines stated above before you start to assemble the product. To prevent scratching on the surface, place the top on a protected surface or carpet and make sure that the underside of the product is facing upwards. To allow you to work comfortably, ensure ample space around the top.
Step 2. There is a certain level of tolerance between each component. The legs are matched to the top before despatch. To ensure that the legs are properly aligned with the pilot holes, it is recommended that you place each leg over the accompanying holes to ensure that the fittings marry up before securing them. Please note that the orientation of the leg can be in two directions.
Step 3. Secure the legs in position using the screws provided. Please insert all of the screws loosely before tightening. Due to narrow tolerances, if one screw is tightened before others are fitted loose, this can cause misalignment. Utilise an electric/impact screwdriver to tighten the screws, ensuring a secure attachment of the legs. Pz2 screwdriver or driver bit required. Avoid overtightening the screws.
Step 4. Finally, with assistance from another person, lift the product and stand it upright.
Now, sit back, relax and enjoy your new purchase!
